5
1
PANEL DESCRIPTION
LONE WORKER
Push to turn the Lone Worker functon ON or OFF.
• If the Lone Worker functon s turned ON, and no operaton occurs
durng the pre-programmed tme perod, the Emergency functon s
automatcally turned ON.
HIGH/LOW
Push to select the transmt output power level temporarly or
permanently, dependng on the pre-programmed settngs.
• Ask your dealer for the output power level for each selecton.
TONE/COLOUR CODE CH SELECT
➥
Whle n the analog mode, push to enter the contnuous
tone selecton mode. Then push [CH Up] or [CH Down] to
select the desred tone frequency/code settng. After se-
lectng, push ths key agan to store the settng.
➥
Whle n the dgtal mode, push to enter the colour code
selecton mode. Then push [CH Up] or [CH Down] to se-
lect the desred colour code. After selectng, push ths key
agan to store the settng.
➥
Whle n the mxed (dgtal and analog) mode, push to enter
the contnuous tone selecton mode. Then push [CH Up] or
[CH Down] to select the desred tone frequency/code set-
tng. After selectng, push ths key to store the settng. After
that, the colour code selecton screen appears. Push [CH
Up] or [CH Down] to select the desred colour code. After
selectng, push ths key agan to store the settng.
C.TONE CH ENT
Push to enter the contnuous tone channel selecton mode.
Then push [CH Up] or [CH Down] to select the desred tone
frequency/code settng. The selected channel remans set untl
another channel s desgnated.
TALK AROUND
Push to turn the Talk Around functon ON or OFF.
• The Talk Around functon equalzes the transmt frequency to the
receve frequency for transcever-to-transcever communcaton.
WIDE/NARROW
Push to swtch the IF bandwdth between wde and narrow.
• The wde passband wdth s pre-programmed to ether 25.0 or
20.0 kHz by your dealer (PMR operaton only).
DTMF AUTODIAL
Push to enter the DTMF channel selecton mode, then push
[CH Up] or [CH Down] to select a desred DTMF channel.
After selectng, push agan to transmt the selected DTMF
code.
RE-DIAL
Push to transmt the last-transmtted DTMF code.
• TX memores are cleared after turnng the power OFF.