3 - 1
SECTION 3
DISASSEMBLY INSTRUCTION
1. Removing the front panel
q
Turn the transceiver’s power OFF, then disconnect the DC
power cable
w
Unscrew the 4 bottom screws, then remove the bottom
cover from the transceiver in the direction of the arrow.
2. Removing the MAIN UNIT
q
Unscrew 7 screws
A
, and unsolder 3 points
B
.
e
Remove the front panel from the main body using a
standard cabinet screw driver as shown below.
Bottom cover
Main body
Front panel
Standard
screw driver
Front panel
Flat cable
Main body
Front panel
Flat cable
r
Disconnect the flat cable from the front panel.
C
D
E
Clip
Shield cover
t
Remove the bush, and remove the MAIN UNIT in the
direction of the arrow.
Bush
w
Unscrew 3 screws
C
and remove the shield cover.
e
Unsolder 3 points
D
(at the antenna connector) and
5 points
E
(at the PA module).
r
Remove the clip.
B
A