17
4
BIIS OPERATION
D
D
Group call
q
When a group call is received;
• Beeps sound.
• “
” appears and the mute is released.
• The programmed text message (e.g.“
”) and the calling
station ID (or text) is displayed alternately, depending on the set-
ting.
• “
” appears or blinks depending on the setting.
w
Push and hold [PTT], then speak into the microphone at a
normal voice level.
NOTE:
Only one station is permitted to speak.
• “
” appears.
e
Release [PTT] to return to receive.
• “
” appears while receiving a signal.
r
To finish the conversation, push [MONITOR] (Moni(Audi))
to send the ‘Clear down’ signal.
• Either station can send a ‘Clear down’ signal.
• “
” is displayed for 2 sec. (approx.)
• “
” disappears and the transceiver returns to the standby condi-
tion.
D
D
Displaying the received call record
— Queue indication
The transceiver memorizes the calling station IDs for record.
Up to 3 calls can be memorized, and the oldest call record is
erased when a 4th call is received. However, once the trans-
ceiver is powered OFF, the all records are cleared.
q
Push [P1] (Digital) for 1 sec.
• Displays following indication.
When a record is available
When no record is available
w
Push [UP] or [DOWN] to select the desired call.
e
Push [P1] (Digital) for 1 sec. again to return to the standby
condition.
• When no operation is performed for 30 sec., the transceiver
returns to the standby condition automatically.
Appears or blinks
Appears
IC-F43GT_GS.qxd 04.4.9 1:10 PM Page 17 (1,1)
