10
2
PANEL DESCRIPTION
COMPANDER KEY
Push to toggle the compander function ON and OFF.
The compander function reduces noise components from the
transmitting audio to provide clear communication.
USER SET MODE KEY
➥
Push and hold to enter user set mode.
• During user set mode, push this key to select an item, and push
[CH Up]/[CH Down] to change the value or condition.
➥
Push and hold this key again to exit user set mode.
OPT OUT KEYS
Push to control the optional unit connector output signal level.
DIGITAL KEY
(BIIS operation only)
➥
Push to select the call ID list, transmit message and stand-
by condition. Toggles between queue channel and
received message record indication after queue channel is
selected.
➥
Push and hold to select queue channel indication.
STATUS UP/DOWN KEYS
(BIIS operation only)
➥
While in the standby condition, push to display the trans-
mit status indication and select a status number.
➥
When a received SDM is displayed, push to cancel the
automatic scroll and scroll the message manually.
➥
When an SDM that contains more than 8 characters is dis-
played, push to scroll the message manually.
D
For SmarTrunk operation only
TRUNKING GROUP KEY
Push to select the Trunking group.
TURBO SPEEDIAL A/B/C/D KEYS
Push to automatically dial a commonly used number with one
push.
CALL/CLEAR-DOWN KEYS
Functions as [
M
] and [#] keys on the 10-keypad.
• Push [
M
] for call, push [#] for clear-down.
TRUNKING CALLER ID KEY
Push [Trunking Caller ID SW] to display the received ID
record in sequence (while in SmarTrunk 3G operation).
IC-F43GT_GS.qxd 04.4.9 1:10 PM Page 10 (1,1)
