![background image](http://html1.mh-extra.com/html/icom/ic-f420/ic-f420_instruction-manual_4269422009.webp)
■
Channel selection
Several types are available, and the channel selection method
may differ according to your system set up.
NON-BANK TYPE:
Push the [
]/[
] keys to select the desired operating
channel, in sequence; or,
push one of the [
CH 1
] to [
CH 4
] keys to select these channels
directly.
BANK-TYPE:
Push [
BANK
] to select the desired bank number.
AUTOMATIC SCAN TYPE:
Channel setting is not necessary for this type. When turning
the power ON, the transceiver automatically starts scanning.
Scanning stops when receiving a call or when taking the mi-
crophone off hook.
■
Turning power ON
q
Push
[
K
I
]
to turn the power ON.
• A power-up alert tone sounds for
about 1 sec. and an opening mes-
sage may appear.
w
If the transceiver is programmed
for a start up passcode, input
digit codes as directed by your
System operator.
• The keys in the diagram below can
be used for password input:
•
The transceiver detects numbers in the same block as identical.
Therefore “1234” and “6789” are the same.
e
When the “
PWORD
” indication does not clear after inputting
4 digits, the input code number may be incorrect. Turn
power off and start over in this case.
OPERATION
2
6
Opening message may
differ depending on the
pre-setting.
Input your password if
this display appears.
KEY
NUMBER
P
0
P
1
P
2
P
3
0
5
1
6
2
7
3
8
4
9