background image

iii

BE  CAREFUL! 

The  transceiver  meets  IP67  require-

ments for dust-tight and waterproof protection. However, once 
the transceiver has been dropped, dust-tight and waterproof 
protection cannot be guaranteed because of possible dam-
age to the transceiver’s case or the waterproof seal.

Even when the transceiver power is OFF, a slight current still 
flows in the circuits. Remove the battery pack or batteries from 
the trans ceiver when not using it for a long time. Otherwise, 
the installed battery pack or batteries will become exhausted, 
and will need to be recharged or replaced.

MAKE SURE

 

to turn OFF the transceiver power before 

connect ing the supplied/optional equipment.

PRECAUTIONS (Continued)

FCC INFORMATION

• FOR CLASS A UNINTENTIONAL RADIATORS:
This equipment has been tested and found to comply with the 
limits for a Class A digital device, pursuant to part 15 of the 
FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment 
is  operated  in  a  commercial  environment.  This  equipment 
generates, uses, and can radiate radio frequency energy and, 
if  not  installed  and  used  in  accordance  with  the  instruction 
manual, may cause harmful interference to radio communi-
cations. Operation of this equipment in a residential area is 
likely to cause harmful interference in which case the user will 
be required to correct the interference at his own expense.

CAUTION: Changes or modifications to this transceiver, not 
expressly approved by Icom Inc., could void your authority 
to operate this transceiver under FCC regulations.

For IC-F4261, IC-F4263
•  The GPS receiver may not work if the transceiver transmits 

near the 510 MHz. This is made in the internal circuit and 
does not indicate a transceiver malfunction.

Summary of Contents for IC-F3260 Series









































Reviews: