24
5
BATTERY CASE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
BP-240 optional battery case
■
When using the BP-240 battery case, install six AAA (LR03)
size alkaline batteries, as illustrated to the right.
q
Unhook the battery cover release hook (
q
), and open the
cover in the direction of the arrow (
w
). (Fig.1)
w
Install six AAA (LR03) size alkaline batteries. (Fig.2)
• Install only alkaline batteries.
• Be sure to observe the correct polarity.
e
Replace the cover in the direction of the arrow (
e
), then
close (
r
). Push the battery cover release hook until it
makes a ‘click’ sound (
t
).
(Fig.3)
CAUTION:
• When installing the batteries, make sure they are all the
same brand, type and capacity. Also, do not mix new and
old batteries together.
• Keep battery terminals clean. It’s a good idea to occa-
sionally clean them.
• Never incinerate used battery cells since internal battery
gas may cause them to rupture.
• Never expose a detached battery case to water. If the bat-
tery case gets wet, be sure to wipe it dry before using it.
NOTE: When the optional battery case is attached, the
battery type must be set to “DRY BATT” when turning ON
the transceiver. (p. 11)
q
BP-240
w
Fig.1
Fig.2
Fig.3
e
r
t
