![background image](http://html1.mh-extra.com/html/icom/ic-f3210d-series/ic-f3210d-series_operating-manual_4286534009.webp)
7
1
PREPARATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
SITE SELECT
<For the IC-F3210D/F4210D series transceivers>
N/A
<For the IC-F3230D/F4230D/F5220D/F6220D series transceivers>
(This key is used for only Multi-site Trunk operation.)
This key allows you to manually select a desired site without
using a roaming scan.
q
Push [Site Select] to display the Site Select screen.
w
Push [CH Up] or [CH Down] to select a desired site from
the preprogrammed roaming list*.
* Up to 48 valid roaming areas are listed on the roaming list. Ask
your dealer for details.
e
Push [Site Select] again to set the selected site, and return
to the standby mode.
r
The transceiver tries to register to the selected site.
CALLALERT
<For the IC-F3210D/F4210D series transceivers>
Hold down for 1 second to transmit a CallAlert to a specified
station/Talkgroup.
<For the IC-F3230D/F4230D/F5220D/F6220D series transceivers>
Push to enter the target ID selection mode for CallAlert.
➥
Hold down for 1 second to transmit a CallAlert.
➥
STATUS
<For the IC-F3210D/F4210D series transceivers>
Hold down for 1 second to transmit the currently selected sta-
tus message to the specified station/Talkgroup.
<For the IC-F3230D/F4230D/F5220D/F6220D series transceivers>
While in the standby mode, push to directly enter the sta-
➥
tus message selection mode, and then select a desired
message using [CH Up] or [CH Down].
After selecting a message, push again to enter the Indi-
➥
vidual or Talkgroup ID selection mode (depending on the
last selected call type).
Hold down for 1 second to transmit the currently selected
➥
status message.
MESSAGE
<For the IC-F3210D/F4210D series transceivers>
N/A
<For the IC-F3230D/F4230D/F5220D/F6220D series transceivers>
While in the standby mode, push to directly enter the mes-
➥
sage selection mode, and then select a desired message
using [CH Up] or [CH Down].
After selecting a message, push again to enter the Indi-
➥
vidual or Talkgroup ID selection mode (depending on the
last selected call type).
Hold down for 1 second to transmit the currently selected
➥
message.