![background image](http://html2.mh-extra.com/html/icom/ic-f3210d-series/ic-f3210d-series_instruction-manual_4244945024.webp)
Setting the squelch level
■
The squelch circuit mutes the received audio signal, depending on
the signal strength.
Rotate [VOL] to turn the trans-
q
ceiver power OFF.
Set [ROTARY SELECTOR] to
w
any channel other than Chan-
nel 16.
While holding down [Upper], ro-
e
tate [VOL] to turn ON the power
and enter the squelch level ad-
justment mode.
Push [Upper] to increase the
r
squelch level (tight squelch), or
push [Lower] to decrease the
squelch level (loose squelch).
• The adjustable range is 0 (loose
squelch) to 9 (tight squelch).
• A beep sounds after pushing
[Upper] or [Lower].
An error beep sounds if you try
to decrease less than 0 or try to increase more than 9.
Therefore, you can determine the current level setting by the type
of beep that sounds.
Rotate [VOL] to turn the power OFF, then ON again to exit the
t
squelch level adjustment mode.
NOTE: This operation may not be available, depending on the
presetting. Ask your dealer for details.
17
3
BASIC OPERATION
[Upper]
[VOL]
[ROTARY SELECTOR]
[Lower]