4
dPMR
™
OPERATION
4-3
Receiving an Individual call
D
When an Individual call is received:
q
• The transceiver will automatically transmit a return sig
-
nal.
• The status indicator blinks orange.
• Beeps sound and the mute is released.
Hold down [PTT], then speak into the microphone.
w
Release [PTT] to receive.
e
After the communication is finished, push [Clear] to
r
send a ‘Disconnect’ signal to terminate the connec-
tion.
NOTE:
The status indicator and Beeps may differ,
depending on the presetting.
Receiving a Group call
D
When a Group call is received:
q
• The status indicator blinks orange.
• Beeps sound and the mute is released.
Hold down [PTT], then speak into the microphone.
w
NOTE:
Only one station is allowed to speak at the
same time.
Release [PTT] to receive.
e
After the communication is finished, push [Clear] to
r
send a ‘Disconnect’ signal to terminate the connec-
tion.
NOTE:
The status indicator or Beeps may differ, de-
pending on the presetting.
Receiving a call
Receiving a Stun, Kill or Revive
D
If an individual Stun or Kill call is received, the trans-
ceiver will automatically transmit an acknowledgement,
and then you cannot receive* or transmit.
* Reception may be available, depending on the preset-
ting of the received stun command.
When a Stun command is received:
➥
• The transceiver cannot be operated until the individual
revive call is received or until data cloning is performed.
• Even if [ROTARY SELECTOR] is changed, the trans
-
ceiver will stay on the same channel the Stun command
received on.
When a Kill command is received:
➥
• The status indicator alternately blinks red and green.
• The transceiver cannot be operated until data cloning is
performed.
NOTE:
Depending on the presetting, the transceiver
may ignore the Stun, Revive and Kill commands, that
are from a non-specified station.
Receiving a Status Polling call
D
If a Status Polling call is received, the transceiver will
automatically transmit its current status.*
Receiving an Ambience Listening call
D
If an Individual call with an Ambience Listening com-
mand is received from a specified station, the transceiv-
er will automatically transmit its microphone audio.*
*Depending on the presetting.
NOTE:
If the transceiver receives an Ambience Lis-
tening command from a station other than the speci-
fied one, the call will be ignored, and the transceiver
will not transmit its microphone audio.
Receiving an Emergency call
D
When an Emergency call is received:
q
• The transceiver will automatically transmit
a return signal
.
• The status indicator blinks orange.
• Beeps sound and the mute is released.
Push [Clear] to return to the standby mode.
w
Talk back function
D
The Talk Back function allows you to select the same
call mode (Analog or Digital) as the received call.
NOTE:
When this function is not activated, the trans-
ceiver always transmits analog signals on “Mixed-
Analog” channels, and digital signals on “Mixed-Dig-
ital” channels.
• On these channels, the transceiver can receive both
analog and digital signals, regardless of the Talk Back
function.
