![background image](http://html1.mh-extra.com/html/icom/ic-f3162t-s/ic-f3162t-s_instruction-manual_4266768015.webp)
10
2
PANEL DESCRIPTION
TX CODE CHANNEL SELECT KEY “
TXC
”
Push to enter the TX code channel selection mode. Then set
the desired channel using [CH Up]/[CH Down]. (pp. 14, 15)
TX CODE CHANNEL UP/DOWN KEYS “
TXCU
” “
TXCD
”
Push to select a TX code channel directly.
ID-MEMORY SELECT KEY “
IDMS
”
➥
Recalls detected ID codes.
• Push this key, then select the ID code using [CH Up]/[CH
Down].
• Up to 5 ID’s are memorized.
➥
Push and hold for 1 sec. to erase the selected ID’s.
SCRAMBLER/ENCRYPTION KEY “
SCR
”
➥
While in the analog mode operation, push to toggle the
voice scrambler function ON and OFF.
➥
While in the digital mode operation*, push to toggle the
encryption transmission function ON and OFF.
* Depending on version, digital mode operation is available only
when the optional UT-126H
digital
modulator
/
demodulator
unit
is installed. Ask your dealer for details.
COMPANDER KEY “
COMP
”
Push to toggle the compander function ON and OFF.
The compander function reduces noise components from the
transmitting audio to provide clear communication.
USER SET MODE KEY “
SET
”
➥
Push and hold for 1 sec. to enter user set mode.
• During in the user set mode, push this key to select an item that
is enabled by your dealer, and change the value or condition by
pushing [CH Up] or [CH Down].
➥
Push and hold this key for 1 sec. again to exit user set
mode.
OPT OUT KEYS “
OP1
” “
OP2
” “
OP3
”
Push to control the output signal level from the optional unit
connector.
OPT MOMENTARY KEYS “
O1M
” “
O2M
” “
O3M
”
Push to control the output signal level from the optional unit
connector.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Summary of Contents for ic-F3162T/S
Page 38: ...MEMO...