![background image](http://html1.mh-extra.com/html/icom/ic-f3100d-series/ic-f3100d-series_instruction-manual_4262720016.webp)
7
2
PANEL DESCRIPTION
■
LED indicator
The LED indicator indicates the status of various
parameters of the transceiver as follows;
(Ref.; R=Red, G=Green, O=Orange)
R*
R*
R*
R*
R*
R*
O
O
O
G G
G G
G G
R O R O R O R O R O R O R O R O
G
G
G
R *
• TX: Lights Red while transmitting a signal.
• RX: Lights Green while receiving a signal.
• Call LED (ON): Turns ON while receiving a matched 2/5-Tone.
• Call LED (Blink): Blinks while receiving a matched 2/5-Tone.
• Fast/Slow scan: Blinks when the Fast/Slow scan is activated.
• Low Battery 1: You should charge the battery. (blinks slowly)
• Low Battery 2: You must charge the battery. (blinks fast)
• TX low Battery 2: Very Low Battery was detected during TX mode.
• Channel Error: A non-programmed channel is selected.
* Lights (or blinks) orange when the optional battery case is attached.
• TX low Battery 1: Low Battery was detected during TX mode.
Summary of Contents for IC-F3100D series
Page 62: ...MEMO...
Page 63: ...MEMO...