![background image](http://html1.mh-extra.com/html/icom/ic-f3021t-s/ic-f3021t-s_instruction-manual_4258498021.webp)
17
4
OPTIONAL SmarTrunk OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Calling another local system subscriber
*
2
Enter the subscriber number followed by [3], [
M
].
• A high-pitched beep indicates that the number is accepted.
• You hear ringing, then two short beeps when the subscriber an-
swers.
• If the other subscriber is on another call or out of range, you hear
a fast busy signal and the call terminates automatically.
D
Memory speed-dialling
*
2
To automatically dial a commonly used number from mem-
ory;
• Push [
M
] followed by the memory location (0–9).
D
Emergency call
*
2
Push [0], [
M
] to initiate an emergency call.
• Contact your dealer for details.
D
Turbo SpeeDial
To automatically dial a commonly used number with one
push;
• Push one of the turbo SpeeDials ([A], [B], [C] or [D]).
D
Programming memory speed dial
q
Push and hold [
M
] until you hear a high-pitched beep.
w
Enter the memory location (0–9, A, B, C, D), the tele-
phone or subscriber number, then [1], [
M
] (or [3], [
M
] if for
another system subscriber).
• A high-pitched beep indicates successful programming.
• Memories [A]–[D] are used for the Turbo SpeeDial.
D
System busy indication
If all channels are busy, three low beeps sound after you ini-
tiate a call. Try the call again later.
D
Displaying the received ID record
Push [Trunking Caller ID SW] to display the received ID
record in sequence.
• The latest received ID is displayed at first.
• The record is cleared when the transceiver is turned OFF.
*
1
Available for 4-key version when the [
M
] or [#] key function is as-
signed to any programmable key.
*
2
Available for 10-keypad version only. Use the Turbo SpeeDial function
instead.
NOTE:
For additional operating instructions, contact your
dealer.