![background image](http://html1.mh-extra.com/html/icom/ic-f3021t-s/ic-f3021t-s_instruction-manual_4258498018.webp)
14
3
BASIC OPERATION
■
User set mode
User set mode is accessed at power ON and allows you to
set seldom-changed settings. In this case you can “custom-
ize” the transceiver operation to suit your preferences and
operating style.
Entering the user set mode:
q
While pushing and holding [Side2] and [Side3], rotate
[VOL] to turn the power ON. Then, push and hold [P0] for
1 sec. to enter user set mode.
w
Push [P0] several times to select the appropriate item.
Then push [CH Up] or [CH Down] to set the desired level/
condition.
• Available set mode functions are
Backlight
,
Beep
,
Beep
Level
,
SQL Level
,
Mic Gain
,
Battery Voltage
,
Signal Moni
and
Lone Worker
.
e
Rotate [VOL] to turn the power OFF to exit user set mode.
NOTE:
User set mode is also available via a programma-
ble function key. Refer to “USER SET MODE KEY.” (p. 9)
■
Stun function
When the specified ID, set as a killer ID, is received, the stun
function is activated.
When the killer ID is received, the transceiver switches to the
password required condition. Entering of the password via the
keypad is necessary to operate the transceiver again in this case.
■
Emergency Call
The emergency call can be performed using [Emergency].
(p. 9)
The transceiver will send a DTMF, 5-tone or MDC 1200 emer-
gency signal* one time only or repeatedly on the emergency
channel. However, when no emergency channel is specified,
the signal is transmitted on the previously selected channel.
If you want to cancel the emergency call, push and hold the
key again before transmitting the call.
* Depending on the operating model type.
■
Man Down Emergency Call
This function requires the optional UT-124R
man
down
unit
and can be performed in conventional mode.
The man down emergency call function transmits an emer-
gency call automatically when the transceiver has been left
in a horizontal position.
After the emergency call, the transceiver performs transmis-
sion and reception alternately with receiving a signal and
emitting audio.
When the emergency reset signal is received, the function is
cancelled.
IMPORTANT:
Set an emergency channel individually, to
provide certain emergency call operation is recommended.