21
5
BATTERY CASE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
Optional battery case (BP-240)
When using the optional battery case, install 6
×
AAA (LR03)
size alkaline batteries as illustrated at right.
q
Unhook the battery cover release hook (
q
), and open the
cover in the direction of the arrow (
w
). (Fig.1)
w
Then, install 6
×
AAA (LR03) size alkaline batteries.
(Fig.2)
• Install the alkaline batteries only.
• Be sure to observe the correct polarity.
• Be sure to pin the ribbon under the batteries. Leave enough of
the ribbon ends extended, to pull when removing the batteries.
e
Fit the cover in the direction of the arrow (
e
), then close
(
r
). And hook the battery cover release hook until it
makes a ‘click’ sound (
t
).
(Fig.3)
CAUTION:
• When installing batteries, make sure they are all the
same brand, type and capacity. Also, do not mix new and
old batteries together.
• Keep battery terminals clean. It’s a good idea to occa
-
sionally clean them.
• Never incinerate used battery cells since internal battery
gas may cause them to rupture.
•
Never expose a detached battery case to water. If the bat-
tery case gets wet, be sure to wipe it dry before using it.
NOTE:
When the optional battery case is attached, the
battery type must be selected to “DRY BATT” when turn-
ing the transceiver ON. (p. 9)
q
BP-240
w
Fig.1
Fig.2
Fig.3
e
r
t
