7
Section
4
SETTINGS
Setting the Beep function
You can turn the Beep function ON or OFF.
1) Rotate [VOL] to turn OFF the transceiver power.
2) Set [Rotary Selector] to any channel other than
Channel 16.
3) While holding down [Lower], rotate [VOL] to turn
ON the power to enter the Beep Level Adjustment
mode.
• An opening beep sounds and the selected channel
number will be announced.
4) Push [Lower] to turn the Beep function ON or OFF.
• When a beep sounds after pushing [Lower], the Beep
function is ON.
• When no beep sounds after pushing [Lower], the Beep
function is OFF.
5) Rotate [VOL] to turn OFF the power and exit the
Beep Level Adjustment mode.
[Rotary Selector]
[VOL]
[Lower]
[Upper]
NOTE:
• The transceiver stores the setting every time you
change it.
• If desired, push [Upper] to adjust the beep level.
NOTE:
Turn ON the Beep function when you set the beep
and announcement level, Call-Ring ringer, ringer
level, microphone gain, squelch level, VOX function,
or VOX gain to check the current level setting by
counting or hearing beeps. (pp. 8–14)
