19
Section
6
OTHER FUNCTIONS
You can set to whether the transceiver scans all
channels across the zone (All), or scans channels in a
selected zone (Zone).
1) Rotate [VOL] to turn OFF the transceiver power.
2) Set [Rotary Selector] to Channel 16.
3) While holding down [PTT], rotate [VOL] to turn ON
the power, to set a scan type.
• When you set to "All," an opening beep and a beep
sounds, and the selected channel number will be
announced.
• When you set to "Zone," an opening beep and two
beeps sound, and the selected channel number will be
announced.
4) Rotate [VOL] to turn OFF the power, then turn ON
again to restart normal operation.
Setting a scan type
[Rotary Selector]
[VOL]
[PTT]
NOTE:
Turn ON the Beep function (p. 7) before you start
setting a scan type.
