![background image](http://html1.mh-extra.com/html/icom/ic-f22sr/ic-f22sr_instruction-manual_4213994022.webp)
17
3
BASIC OPERATION
New master
D
D
USING THE DTCS CODE
This transceiver is equipped with 83 DTCS codes. DTCS operation
provides communication with silent standby since you will only re-
ceive calls from group members using the same DTCS number.
You can assign different numbers to CH 1 to CH 15 independently.
q
While pushing and holding [PTT], [S-Ring/C-Ring] and [MONI],
turn [VOL] to turn the power ON.
w
Select the desired CH 1 to CH 15 that you want to assign the
DTCS code to.
e
Push and hold [MONI] until a beep (Pi) is emitted.
r
Push [PTT] the necessary number of times to choose the 100
digit of the desired code number.
t
Push [S-Ring/C-Ring].
• Con
fi
rmation beep is emitted. (See p. 15)
y
Push [PTT] the necessary number of times to choose the 10 digit
of the desired code number.
u
Push [S-Ring/C-Ring].
• Con
fi
rmation beep is emitted. (See p. 15)
i
Push [PTT] the necessary number of times to choose the 1 digit
of the desired code number.
o
Push [S-Ring/C-Ring].
•
Con
fi
rmation beep is emitted. (See p. 15)
!0
Push [PTT] once more, if you want to use
Inverse
mode.
!1
Push [S-Ring/C-Ring] to complete the setting.
•
Con
fi
rmation beep is emitted. (See p. 15)
!2
Turn the power OFF, and then ON again.
IC-F22SR_4.qxd 06.11.1 1:21 PM Page 22
Summary of Contents for IC-F22SR
Page 1: ...INSTRUCTION MANUAL PMR446 FM TRANSCEIVER iF22SR...
Page 34: ...29 MEMO...
Page 35: ...30 MEMO...