![background image](http://html2.mh-extra.com/html/icom/ic-f1610/ic-f1610_service-manual_4199056014.webp)
P
0
P
0
5-2 INITIAL SET MODE
The following items can be adjusted via
Initial Set Mode
without opening the transceiver’s case.
■
ENTERING INITIAL SET MODE
1
Turn the transceiver power OFF.
2
While pushing
and
, turn power ON.
• Bank number appears regardless of the channel sepa-
ration type, ‘bank’ or ‘free’.
3
Push
to cycle through the initial set mode items.
NOTE:
Initial Set Mode access can be inhibited through
PC programming. In such case,
cannot be used
and only ‘DISPLAY’ setting is available. Ask your Dealer
or Icom Service Center for PC programming.
P
1
P
3
Backlight
—
Link
ON/OFF
DTCS bal-
ance
Low 1
—
Squelch
level
Beep tones
ON/OFF
Tone
deviation
Low 2
Contrast
Minimum
AF level
Beep level
Max. voice
deviation
High
Indicate the received signal level
regardless of
to
keys.
1
2
3
4
5
6
DISPLAY
AF/SQUELCH
BEEP TONES
DEVIATION
S-METER
TX POWER
5 - 2
P
3
P
2
P
1
P
3
P
2
P
3
P
2
P
1
P
3
P
2
P
3
P
1
P
1
ITEM
Display backlight
Display contrast
Squelch level
Minimum AF level
Link/unlink beep tones
with the volume control
Beep ON/OFF
Maximum beep level
DTCS balance
CTCSS/DTCS
Tone deviation
Maximum voice deviation
S-meter level
Transmit low power (L1)
Transmit low power (L2)
Transmit high power (H)
MODE
No.
NOTE
2 beeps: link
1 beep: unlink
2 beeps: ON
1 beep: OFF
Effective after exiting Initial Set Mode
Automatic transmission while pushing the key.
Automatic transmission while pushing the key.
Separate setting for CTCSS and DTCS
depending on the programmed tone system.
Automatic transmission while pushing the key.
Received signal level is shown in the display.
Automatic transmission while pushing the key.
Same as above.
Same as above.
METHOD
Push
to select ‘bright’, ‘dark’ or ‘off’.
Rotate the volume control while pushing
.
Rotate the volume control while pushing
.
Rotate the volume control while pushing
.
Push
to select ‘link’ or ‘unlink’.
Push
to turn beeps ON and OFF.
Rotate the volume control while pushing
.
Rotate the volume control while pushing
.
Rotate the volume control while pushing
.
Rotate the volume control while pushing
.
—
Rotate the volume control while pushing
.
Rotate the volume control while pushing
.
Rotate the volume control while pushing
.
No.
ITEM
P
1
P
2
P
3
SELECTABLE CONDITIONS
■
SELECTION METHOD
■
SELECTABLE ITEMS
,,
,,,
,,,
,