OPERATION
23
5
‘
‘
Setting squelch level
The squelch circuit mutes the received audio signal depending on
the signal strength. Scan proceeds in sequence from lower channel
to higher channel numbers.
q
While pushing [PTT] and [W/N], turn the transceiver’s power on
to enter the squelch adjustment mode.
w
Push [MONI] to increase the squelch level (tight squelch) or
[W/N] to decrease the squelch level (loose squelch).
• Squelch level will be fixed after 1 sec.
‘
‘
Wide/Narrow selection
You can easily to toggle between wide FM mode and narrow FM
mode by pushing [W/N] key.
• Push [W/N]: Turns to wide FM mode
• Pushing and holding [W/N]: Turns to narrow FM mode
NOTE:
Some channels cannot toggle between wide FM and nar-
row FM. Please refer the Frequency channel list. (pgs. 14, 16)