Icom IC-F111, Instruction Manual

Page: 12 / 24

D TX code channel selection
If the transceiver has a
[TX CH]
key, the display can be tog-
gled between the operating channel number (or name) and
TX code channel number (or name). When the TX code chan-
nel number (or name) is displayed, the
[ ] or [ ] key se-
lects the TX code channel.
To select a TX channel:
q
Push [TX CH] —a TX code channel appears.
w
Push
[ ]
or
[ ]
to select the desired TX code channel.
e
After selecting, push [TX CH] to set.
• Returns to the stand-by mode.
r
Push [CALL] to transmit the selected TX code.
D TX code number selection
If the transceiver has a
[TX CH]
key, the TX code contents
can be changed within the allowable digits.
To select a TX code:
q
Push
[TX CH]
—a TX code number appears, and the first
digit blinks.
w
Push
[ ]
or
[ ]
to select the desired number of the
blinking digit.
e
Push
[TX CH]
to enter the selected number and the next
digit will start blinking automatically.
r
Repeat step
w
and
e
to input all allowed digits.
t
Push [CALL] to transmit the selected TX code.
D DTMF transmission
If the transceiver has a
[DTMF]
key, the automatic DTMF
transmission function is available. Up to 8 DTMF channels
may be available.
To transmit a DTMF code:
q
Push [DTMF] —a DTMF code channel appears.
w
Push
[ ]
/
[ ]
to select the desired DTMF channel.
e
Push and hold [DTMF] to transmit the DTMF code on the
selected DTMF channel.
D Scrambler function
The UT-109 (#02) or UT-110 (#02) optional voice scrambler
unit provides high performance private communication be-
tween stations with the same scrambler codes.
To turn the scrambler function ON and OFF:
q
Push and hold [SCRM] to turn the scrambler function ON.
w
Push
[SCRM]
to turn the function OFF.
9
2
OPERATION