![background image](http://html1.mh-extra.com/html/icom/ic-f111/ic-f111_instruction-manual_4213438011.webp)
■
Receiving and transmitting
RECEIVING:
q
Push [ ] to turn the power ON.
w
Push
[
]
and
[
]
to select a channel.
e
When receiving a call, adjust the audio output level to a
comfortable listening level.
TRANSMITTING:
q
Take the microphone off hook.
• 2-tone, 5-tone mute may be released. (The ‘audible’ condition is
selected and “
” appears.)
• A priority channel may be selected automatically.
w
Wait for the channel to become clear.
• The channel is busy when “
” appears.
e
Push the
[CALL]
key when initiating a call from your side.
• Coded audio may be heard from the transceiver, then “
” ap-
pears.
• This operation may not be necessary depending on your signal-
ing system. Contact your dealer.
r
While pushing and holding [PTT], speak into the micro-
phone at your normal voice level.
t
Release [PTT] to receive.
IMPORTANT!:
To maximize the readability of your signal;
➥
Pause briefly after pushing [PTT].
➥
Hold the microphone 5 to 10 cm (2 to 4 inches) from
your mouth, then speak into the microphone at a nor-
mal voice level.
D
Transmitting notes
• Transmit inhibit function
The transceiver has several inhibit functions which restrict
transmission under the following conditions:
- The channel is in mute condition (‘Inaudible’ condition; “
” does
not appear).
- Channel is busy.
- A matched/un-matched CTCSS code is received. (Depending on
the pre-setting.)
- The selected channel is a ‘receive only’ channel.
• Time-out timer
After continuous transmission for a pre-programmed period,
the time-out timer is activated causing the transceiver to stop
transmitting and automatically select receive.
• Penalty timer
Once the time-out timer is activated, transmission is further
inhibited for a period determined by the penalty timer.
8
2
OPERATION
Summary of Contents for IC-F111
Page 1: ...INSTRUCTION MANUAL iF111 VHF TRANSCEIVER iF121 iF211 iF221 UHF TRANSCEIVER ...
Page 22: ...MEMO ...
Page 23: ...MEMO ...