background image

6

1

1

PANEL DESCRIPTION

PRIORITY A CHANNEL, PRIORITY B CHANNEL

Push to select the Priority A or Priority B channel.

 

PRIORITY A CHANNEL (REWRITE),
PRIORITY B CHANNEL (REWRITE)

Push to select the Priority A or Priority B channel.

 

 Hold down 

 

[Prio A (Rewrite)] or [Prio B (Rewrite)] to as-

sign the operating channel to Priority A or Priority B chan-
nel, respectively.

MEMORY CHANNELS 1, 2, 3, 4

 Push to directly select memory channel 1, 2, 3 or 4, if pro-

 

grammed.

MONI // only for the LMR mode //

 Hold down to cancel the CTCSS (DTCS) or 2-Tone mute. 

 

The transceiver enters “Audible” mode.
Push to turn OFF the function.

 

MONI (Audi) // only for the PMR mode //

 Hold down to cancel the CTCSS (DTCS) or 5-Tone mute. 

 

The transceiver enters “Audible” mode.
 Push or hold down to activate one or two functions if pro-

 

grammed.

LOCK

< for the Non-display type transceivers >

 Hold down this key to lock all programmable keys except 

 

the followings:

   

[Moni][Lock][Emer][Surveillance][Siren][Lone 
Worker]
, and [Shift].

< for the Simple type and 10-key type transceivers >

 Hold  down  until “LOCK  ON”  is  displayed  to  lock  all  pro-

 

grammable keys except the followings:

 

 [Moni][Lock][Emer][Surveillance][Siren][Lone 
Worker]
, and [Shift].
 To turn OFF the Key Lock function, hold down until “LOCK 

 

OFF” is displayed.

LONE WORKER

< for the Non-display type transceivers >

 Hold down to turn ON the Lone Worker Function.

 

Push to turn OFF the Function.

 

< for the Simple type and 10-key type transceivers >

Push to turn the Lone Worker Function ON or OFF.

 

  •  If no operation occurs for a set time period, the trans-

ceiver automatically enters the emergency mode.

HIGH/LOW

 Push  to  select  the  transmit  output  power  temporarily  or 

 

permanently, depending on the presetting.

Summary of Contents for IC-F1000S



























Reviews: