![background image](http://html2.mh-extra.com/html/icom/ic-e91/ic-e91_instruction-manual_3456536009.webp)
3
2
PANEL DESCRIPTION
2
o
CALL/RX
➝
CS KEY [CALL]/[RX
➝
CS](CALL)
➥
Push to select the call channel/TV channel. (p. 16)
➥
During DV mode operation, push and hold for 1 sec. to
set the received call signs (station and repeaters) for op-
eration. (p. 47)
➥
Enters or sends the DTMF code “C.” (pgs. 103, 104)
!0
MEMORY/SELECT MEMORY WRITE KEY
[MR]/[S.MW](MR)
➥
Push to select memory mode. (p. 15)
➥
During memory mode operation, push to toggle be-
tween memory and memory bank mode. (p. 68)
➥
Push and hold for 1 sec. to enter select memory write
mode. (p. 64)
➥
Enters or sends the DTMF code “B.” (pgs. 103, 104)
!1
VFO/MHz KEY [VFO]/[MHz](VFO)
➥
Push to toggle select VFO mode. (p. 15)
➥
During VFO mode operation, push and hold for 1 sec. to
select and toggle 1 MHz and 10 MHz tuning steps
(p. 18)
➥
Enters or sends the DTMF code “A.” (pgs. 103, 104)
!2
BAND KEY [BAND]
➥
During VFO mode operation, push to select an operat-
ing frequency band. (pgs. 16, 17)
➥
During memory bank mode, push to select a memory
bank. (p. 68)
➥
Enters or sends the DTMF code “D.” (pgs. 103, 104)
!3
EXTERNAL DC IN JACK [DC IN]
➥
Connects the supplied wall charger, BC-167A/D, to
charge the attached battery pack. (p. 10)
➥
Connect an external DC power supply through the op-
tional CP-19R or OPC-254L for external DC operation.
(p. 13)
!4
DATA JACK [DATA]
Connects a PC through the optional data communication
cable, OPC-1529R, for low-speed data communication or
control the transceiver remotely using the optional RS-91
(OPC-1529R is supplied). (p. 56)
!5
VOLUME CONTROL [VOL]
Rotate to adjust the audio output level. (p. 20)
!6
CONTROL DIAL [DIAL]
➥
Rotate to tune the operating frequency. (p. 18)
➥
During memory mode, rotate to select the memory
channel. (pgs. 15, 64)
➥
While pushing and holding
[BAND]
, selects the operat-
ing band in VFO mode. (p. 18)
➥
While scanning, changes the scanning direction. (p. 75)
➥
While pushing and holding
[SQL]
, sets the squelch
level. (p. 21)
➥
While pushing and holding
[BAND]
, selects the pro-
grammed bank in memory mode. (p. 68)
!7
EXTERNAL SPEAKER/MICROPHONE JACK [MIC/SP]
Connect an optional speaker-microphone or headset, if de-
sired.
See page 121 for a list of available options.