![background image](http://html2.mh-extra.com/html/icom/ic-e91/ic-e91_instruction-manual_3456536072.webp)
66
8
MEMORY/CALL CHANNELS
■
Memory channel programming
q
Push
[VFO]
to select VFO mode.
w
Set the desired frequency:
➥
Select the desired band with
[BAND]
.
➥
Set the desired frequency with
[DIAL]
.
➥
Or set the desired frequency with keypad directly.
In this case, the band and frequency settings with
[BAND]
and
[DIAL]
as above are not required.
➥
Set other data (e.g. offset frequency, duplex direction,
tone squelch, etc.), if desired.
e
Push and hold
[S.MW](MR)
for 1 sec. to enter select mem-
ory write mode.
• 1 short and 1 long beep sound.
• “
µµ
” indicator blinks.
r
Rotate
[DIAL]
to select the desired channel.
• Call channels (C0, C1), VFO (VFO) and scan edge channels
(0A/0B to 24A/24B), as well as regular memory channels, can
be programmed in this way.
t
Push and hold
[S.MW](MR)
for 1 sec. to program.
• 3 beeps sound.
• Memory channel number automatically increases when contin-
uing to push and hold
[S.MW](MR)
for 3 sec. after programming.
[EXAMPLE]:
Programming 145.870 MHz into memory chan-
nel 11 (blank channel).
[DIAL]
145 000
BANK
BANK :----
:----
MNAME:
MNAME:
SKIP
SKIP :OFF
:OFF
FM
FM
r
µ
000
BANK
BANK :----
:----
MNAME:
MNAME:
SKIP
SKIP :OFF
:OFF
r
µ
011
A
FM
FM
145 870
PSKIP
PSKIP
A
FM
FM
145 870
PSKIP
PSKIP
A
µ
FM
FM
145 870
PSKIP
PSKIP
011
VFO mode
Enter select memory
write mode.
Rotate
[DIAL]
to select
channel 11.
Push
for 1 sec.
Channel 11
Push and hold
for 1 sec. to program.
Return to the VFO mode.