3
2
PANEL DESCRIPTION
q
LIGHT [LIGHT] (p. 10)
Turns the light for display and keypad ON or OFF.
w
PTT SWITCH [PTT] (p. 11)
Push and hold to transmit; release to receive.
e
TUNING DIAL [DIAL] (p. 8)
➥
Rotate [DIAL] to select the desired frequency. (default)
➥
Rotate [DIAL] to select the BANK number. (default)
➥
Rotate [DIAL] to select the memory channel or WX
channel number. (default)
➥
Rotate [DIAL] to adjust the audio level.
r
EXTERNAL SPEAKER AND MICROPHONE JACKS
[MIC/SP]
Connect an OPC-967
HEADSET ADAPTER
or headset, if
desired.
t
ANTENNA CONNECTOR [ANT]
Connects the supplied antenna.
y
FUNCTION DISPLAY (pgs. 6, 7)
u
UP/DOWN KEYS [
Y
]/[
Z
] (p. 8)
➥
Push [
Y
] to increase the audio level, push [
Z
] to
decrease the audio level. (default)
➥
Push to select the operating channel or fre-
quency.
➥
Push to select the BANK number.
i
SQUELCH KEY [SQL (SCAN)] (p. 9)
➥
Push [SQL], then rotate the [DIAL] (or push
[
Y
]/[
Z
]) to select the squelch level.
• 24 squelch levels and squelch open (0) are available.
➥
Push
, then push [SQL] to starts scan func-
tion:
Frequency mode: Frequency scan function.
MEMORY mode: Bank scan or Full memory chan-
nel scan function.
o
POWER SWITCH [PWR]
➥
Push and hold for 0.5 sec. to turn the power ON
or OFF.
➥
While pushing and holding [
Y
]/[
Z
] key, push
[PWR] to enter the cloning function mode.
(OPC-
967 must be connected.)
!0
CLR KEY [CLR (DIAL/
YZ
)] (p. 8)
➥
Push
, then push [CLR] to exchange the
e
tuning Dial function and
u
UP [
Y
]/DOWN [
Z
]
switch function;
- Dial: tuning (default)
- UP [
Y
]/DOWN [
Z
]: audio level setting (default)
NOTE: You can adjust the audio level via [DIAL]
and select the frequency, memory channel or
BANK number via UP [
Y
]/DOWN [
Z
] keys.
➥
Push [CLR] to turn to the frequency mode, when
memory channel, WX channel or 121.5 MHz is
selected.
