manualshive.com logo in svg

Icom IC-A23, Instruction Manual

Share
Download
Icom IC-A23 Instruction Manual Download Page 32

28

8

CLONING

Cloning allows you to quickly and easily transfer the
programmed data from one transceiver to another transceiver,
or, data from PC to a transceiver using the optional CS-A23
cloning software.

D

Transceiver to transceiver cloning

q

Connect the OPC-474 

CLONING CABLE

with adapter plugs

to the [SP/MIC] jack of the master and slave transceivers.

• The master transceiver is used to send data to the slave trans-

ceiver.

w

While push and holding [

Y

]

+ [

Z

],push [PWR] ON to

enter cloning mode (for both
the master transceiver and
slave transceiver both.).

• “CLONE” appears and the

transceivers enter the clone
standby condition.

e

Push [ENT] on the master
transceiver.

• “CL-OUT” appears in the

master transceiver’s display.

• “CL-IN” appears automati-

cally in the slave trans-
ceiver’s display.

r

When cloning is finished, turn power OFF, then ON again
to exit cloning mode.

NOTE: DO NOT transfer the data from IC-A23 to IC-A5,
when the data contains the NAV band data. In such case,
cloning error may occur.

Cloning using PC

Data can be cloned to and from a PC (IBM compatible) using
the optional CS-A23 

CLONING SOFTWARE

and the optional

OPC-478 

CLONING CABLE

. Consult the CS-A23 

CLONING

SOFTWARE

HELP message for details.

D

Cloning error

NOTE: DO NOT push [ENT] on the slave transceiver dur-
ing cloning. This will cause a cloning error.

When the display at right ap-
pears, a cloning error has oc-
curred.

In this case, both transceivers automatically return to the
clone standby condition and cloning must be repeated.

Summary of Contents for IC-A23








































Reviews:

No comments

Brands by name

Popular brands

Load more brands