![background image](http://html2.mh-extra.com/html/icom/ic-910h/ic-910h_programming-manual_3521249012.webp)
10
© June 2011 Icom America
To Make an Emergency Call
To call a specific radio (or dispatch):
Press and hold the assigned Emergency Key for 2 seconds. The RX radio beeps as it forewarns you of the
upcoming emergency call.
The radio diverts to the Emergency channel (as assigned in ATR) and sends the 5- tone signal.
RX Radio:
Memory Ch
Field
Setting / Description
5Tone Signaling
»
Form
Set to
EIA
5Tone Signaling
»
RX C.No
Set to 1. Points to 1
st
line in the RX Code CH window: the
RX Radio’s Emergency RX Code
RX Code CH (under 5 Tone)
Field
Setting / Description
Line 1
»
RX Code
RX radio Emergency Code (from Memory Ch
window…usually the same for all radios)
Line 1
»
ID Dec
Set to ON. This allows the radio to show the TX radio ID.
Line 1
»
Text
Enter emergency text to display on dispatch radio, if
desired.
RX Code Setting (under 5 Tone)
Field
Setting / Description
Timer
»
ID Decode
Set to
1.6
TX Code Setting (under 5 Tone)
Field
Setting / Description
Timer
»
Displayed Digit
Enter the digits you want displayed. For example: Send
98765, but if you only want 765
to show on this radios
display, enter “345”. Now the last 3 digits of any 5 tone ID
will be displayed.