![background image](http://html.mh-extra.com/html/icom/ic-9100/ic-9100_service-manual_612372032.webp)
ADJUSTMENT ITEM
TRANSCEIVER'S
CONDITION
OPERATION
MEASURE
POINT
ADJUST
POINT
VALUE
TX ADJUSTMENT
(TX power)
• Frequency: 14.100 MHz
• Mode: USB
• Transmitting
1) Connect an RF power meter to
[ANT1].
2) Connect an audio generator and
millivoltmeter to [MIC], and then
set it as;
Frequency : 1.5 kHz
Level
†
: 1 mV
[ANT1]
L612
Max. TX power
RX ADJUSTMENT
(Sensitivity)
• Frequency: 14.150 MHz
• Mode: USB
• Receiving
1) Connect an SSG to [ANT1], and
then set it as;
Frequency : 14.1515 MHz
Level
†
:
–15 dBµ (–122 dBm)
Modulation:
None
2) Connect a millivoltmeter and a
speaker to [EXT-SP].
[EXT-SP]
L723, L1071 Max. AF output
level
MIXER BALANCE
• Frequency: 14.150 MHz
• Mode: USB
• Receiving
1) Connect a terminator to [ANT1].
2) Connect a spectrum analyzer to
the J741.
J741
R725, R726
Min. LO level
(Freq.=
78.605 MHz)
RX SUPRIOUS*
• Frequency: 3.621565 MHz
• Mode: USB
• [PREAMP]: OFF
• Receiving
• Connect a millivoltmeter to [EXT-
SP].
[EXT-SP]
Min. AF output
level
IMAGE REJECTION
• Frequency: 14.150 MHz
• Mode: USB
• [PREAMP]: OFF
• Receiving
1) Connect an SSG to [ANT1], and
then set it as;
Frequency : 14.0765 MHz
Level
†
:
+50 dBµ (–57 dBm)
Modulation
: None
2) Connect a millivoltmeter and a
speaker to [EXT-SP].
[EXT-SP]
R1276,
C1121
(Repeatedly)
Min. AF output
level
*: For all models except [TPE] and [KOR].
†
; The output level of the standard signal generator (SSG) is indicated as the SSG’s terminated circuit.
4-5 ADJUSTMENTS ON THE RF-A UNIT
4 - 6