Icom IC-756PROII Instruction Manual Download Page 86 | Manualshive

Page: 86 / 88

background image

15

84

OPTIONS

IC-PW1

HF/50 MHz ALL BAND 1 kW LINEAR AMPLIFIER

Full-duty 1 kW linear amplifier including an automatic antenna tuner. Has
automatic tuning and band selection capability. Full break-in (QSK) oper-
ation is possible. The amplifier/power supply unit and the remote control
unit are separated.

AH-4

HF/50 MHz AUTOMATIC
ANTENNA TUNER

Specially designed to tune a long
wire antenna for portable or mobile
HF operation. The PTT tuner start
function provides simple operation.

• Input power rating: 120 W

AH-2b

ANTENNA ELEMENT

A 2.5 m long an-
tenna element for
mobile operation
with the AH-4.

• Frequency

coverage:
7–54 MHz bands
with the AH-4

SM-20

DESKTOP MICROPHONE

Unidirectional, electret microphone
for base station operation. Includes
[UP]/[DOWN] switches and a low
cut function.

SP-21

EXTERNAL SPEAKER

Designed for base station opera-
tion.

• Input impedance: 8

Ω

• Max. input power: 5 W

CT-17

CI-V LEVEL CONVERTER

For remote transceiver control
using a personal computer. You
can change frequencies, operating
mode, memory channels, etc.

HM-36

HAND MICROPHONE

Hand microphone equipped with
[UP]/[DOWN] switches.

UT-102

VOICE SYNTHESIZER UNIT

Announces the receive frequency, mode
and S-meter level in a clear, electroni-
cally-generated voice, in English (or
Japanese).

SP-20

EXTERNAL SPEAKER

4 audio filters; headphone jack; can con-
nect to 2 transceivers.
• Input impedance: 8

Ω

• Max. input power: 5 W

PS-125

DC POWER SUPPLY

Light weight switching regulator
system power supply.

• Output voltage: 13.8 V DC
• Max. current drain: 25 A

•About DC power supply

The use of IC-756PROII (#23, #24, #25, #28, #30) in com-
bination with the DC power supply complies with European
Harmonised Standard regulations under the conditions
listed below.

Conditions
•In combination with PS-125

•About IC-PW1

LINEAR AMPLIFIER

The IC-PW1

LINEAR AMPLIFIER

does not comply with Euro-

pean Harmonised Standard regulations. Please do not use
this equipment within European countries.

IC-756PROII.qxd 02.1.8 15:52 Page 84

«
...
84
85
86
87
88
»

Summary of Contents for IC-756PROII

























































































Reviews:

No comments

Related manuals for IC-756PROII

Brand: Abilia Pages: 6

Brand: Lamtec Pages: 80

Brand: Icom Pages: 48

Brand: Sytech Pages: 5

Personal PA Receiver PPA R35N

Brand: Williams Sound Pages: 6

Brand: MAMAC SYSTEMS Pages: 4

Brand: Trust Pages: 9

Brand: GBD Pages: 4

Brand: C. Crane Pages: 16

Brand: Harman Kardon Pages: 24

Brand: Interlogix Pages: 27

Premier Elite 32XPH-W

Brand: Texecom Pages: 20

Brand: Z-CAR Pages: 3

Brand: JTS Pages: 24

Brand: Radio Shack Pages: 37

Family Radio Service

Brand: Radio Shack Pages: 2

WiNRADIO A RTEM IS WR- G69DDC

Brand: RADIXON Pages: 133

Brand: StarTech.com Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands