![background image](http://html2.mh-extra.com/html/icom/ic-7100/ic-7100_basic-manual_3602293077.webp)
5
D-STAR OPERATION <BASIC>
5-15
Using the
D
“
Gateway CQ
”
(Gateway call)
When “Gateway CQ” is selected in the “TO SELECT”
screen, the repeater to make a gateway CQ call can be
selected from the repeater list.
Example:
Making a gateway CQ call to (Japan; Hama
-
cho) from the “Hirano” repeater.
Push
q
DR
(
C
) to select the DR mode.
Check whether or not “TO” is selected.
w
• If “TO” is not selected, touch the “TO” field.
Touch the “TO” field.
e
• The “TO SELECT” screen appears.
Touch “Gateway CQ.”
r
• The “REPEATER GROUP” screen is displayed.
Touch the repeater group where your destination re-
t
peater is listed.
• Example: “11: Japan”
Touch the destination repeater.
y
• Example: “Hamacho”
• The transceiver returns to the DR mode screen, and
“Hamacho” is displayed in “TO.”
After selecting a repeater, you can select another re-
peater preset in your transceiver by rotating [DIAL] or
[M-CH] (
L
).
Or, you can select another repeater group by rotating
[BANK] (
L
).
“Hamacho” is set in “TO.”
Touch the desti-
nation repeater
( Example:
Hamacho)
Touch the re-
peater group
( Example:
“11: Japan”)
“TO” (Destination) setting (Continued)
“TO” is selected.
Touch
“TO.”
Touch
“Gateway CQ.”
The
L
,
R
,
C
or
D
in the
instructions indicate the
part of the controller.
L
: Left side
R
: Right side
C
: Center bottom
D
: Display (Touch screen)
L
eft
R
ight
C
enter
D
isplay