3
BASIC OPERATION
3-14
Setting frequency (Continued)
Programming the user band edge
D
When “ON (User)” or “ON (User) & TX Limit” is selected
in the “Band Edge Beep” item, the “User Band Edge”
item
appears in the “Function” Set mode.
A total of 30 band edge frequencies can be programmed
in the “User Band Edge” item.
NOTE:
• All frequency ranges are set to default, so you
should delete or change them to add the desired
band edge frequency.
• Program each channel from left to right and each
frequency must be higher than the preceding fre-
quency.
• The frequency that is duplicated, or out of a trans
-
mit frequency range, cannot be programmed.
Push
q
SET
(
C
) to enter the Set mode.
Touch the “Band Edge Beep” item of the “Function”
w
Set mode.
Function >
Band Edge Beep
• If the specified item is not displayed, touch [
Y
] or [
Z
](
D
)
one or more times to select the page.
Touch the “ON (USER)” or “ON (User) & TX Limit”
e
option.
Touch the “User Band Edge” item of the “Function”
r
Set mode.
Function >
User Band Edge
Follow the instructions in the next topics to delete,
t
insert, edit, change or reset Band edges.
After you have finished, push
y
SET
(
C
) to exit the Set
mode.
• Deleting a Band edge
Enter the “User Band Edge” screen.
q
SET
(
C
) >
Function >
User Band Edge
Touch for 1 second the Band edge to be deleted
w
.
• If the specified band edge is not displayed, touch [
Y
] or
[
Z
](
D
) one or more times to select the page.
Touch “Delete.”
e
• The selected Band edge has been deleted, and then re
-
turns to the User Band Edge screen.
Touch [
r
](
D
) or push
MENU
(
C
) to return to the
“Function” Set screen.
The
L
,
R
,
C
or
D
in the instructions indicate the
part of the controller.
L
: Left side,
R
: Right side,
C
: Center bottom
D
: Display (Touch screen)
Touch
“Function”
Push
SET
Touch “User
Band Edge”
Touch for 1 sec-
ond the Band
edge to be de-
leted
Touch “Delete”
Example: Deletes the 1.800–1.999999MHz range
