![background image](http://html2.mh-extra.com/html/icom/ic-7100/ic-7100_specification_3601344003.webp)
HF/VHF/UHF ALL MODE TRANSCEIVER
HF/50/144/430/440MHz Multi-band, Multi-mode
The IC-7100 fully covers the HF, 50, 144, 430/440 MHz amateur bands in
multiple modes, providing 100W on HF/50MHz bands, 50W on 144MHz
band and 35W on 430/440MHz band.
●
CW full break-in, CW receive reverse, CW auto tuning
●
Optional multi-function microphone,
HM-151
●
Band scope and SWR graphic display
●
RF speech compressor controlled by the DSP
●
Voice memory function
●
Multi-function Meter
●
495 regular, 4 call, 6 scan edge and 900
DR mode repeater channels
●
4 channels TX voice memories
●
±0.5ppm frequency stability
●
Auto reply function*
●
Digital callsign squelch and digital code squelch*
●
12.5kHz IF output
for DRM
(
Digital Radio Mondiale
)
receive
* D-STAR DV mode only
Other Features
AGC function loop
IF
AMP
IF
AMP
AMP
AD
DA
DA
AGC
DET
AGC
DET
AF
BPF
455kHz
36kHz
AGC loop
DSP
DSP Controlled AGC Function Loop
The digital signal processing is incorporated into the AGC function loop.
The results of signal processing provide feedback to the AGC function.
The AGC function works on the
intended signal and produces
a constant audio output.
The AGC time constants are
flexibly adjustable from slow,
middle, fast (or AGC off) for
each operating mode.
Digital Features Controlled by the IF DSP
A high-performance 32-bit floating point IF
DSP delivers rich digital signal processing
features, including digital IF filter, digital
twin PBT, noise reduction, CW auto tune, etc.
Those digital features work on all bands from
HF to V/UHF bands.
32-bit floating point IF DSP
SD Memory Card Slot for Saving Data
When used with an SD card, the SD card can
store various contents including voice memory,
memory channels, D-STAR repeater memories
and other personal settings can be saved to the
SD card and can be loaded to the transceiver.
SD memory card slot
Near Repeater Function
With an external, 3rd party GPS*, search the internal
database based on your location.
* External GPS receiver or manual data input required.
DR
(
D-STAR Repeater
)
Mode Operation
The DR mode operation makes the D-STAR operation
simple and straight forward, even if you are new to
D-STAR operation.
D-STAR DV Mode
(
Digital Voice + Data
)
The IC-7100 provides D-STAR DV mode digital voice and low speed data
communication.
DR mode display
Near repeater function
Built-in RTTY Functions
The built-in RTTY decoder allows you to instantly read an RTTY message on
the display. No external TNC or PC required for reading. The eight RTTY
memories can memorize and transmit often used RTTY sentences. The RTTY
memory is 70 character per memory channel.
Optional RS-BA1 IP Remote Control Software
The optional RS-BA1 software allows you
to operate the IC-7100 from a remote PC
over the Internet or local home network.
IP Remote Control
through your Home Network
IP Remote Control
over the Internet
RS-BA1
RS-BA1
RS-BA1
IP Network
RS-BA1
Remote location
Transceiver location
Internet
RC-28
IC-7100
IC-7100
RC-28
MBF-1
Easy Vehicle Mounting with Optional MBF-1
The combination of the optional MBF-1 suction
cup mounting base and MBA-1 controller bracket
provides easy tilt and swivel adjustments for
mobile operation. The large suction
cup can mount to dashboards or
other flat surfaces and can be
removed easily.
ion
acket
ts for
tware
Summary of Contents for IC-7100
Page 1: ......