![background image](http://html1.mh-extra.com/html/icom/ic-706mkii/ic-706mkii_programming-manual_3467196002.webp)
2
Knowledge Base |
©2019 Icom America Inc. The Icom logo is a registered trademark of Icom Inc.
17.
To activate the tone settings, press MENU to select
M4
. Press F3 until a “
T
” appears on the display.
Saving Settings in a Memory Channel
1.
Press MENU to scroll through the menu. Select
M2
.
2.
Rotate the M-CH dial to select a memory channel. (A [blank] indicates that the channel is open.)
3.
Note:
Choosing a pre-programmed channel (not blank) will cause you to overwrite that channel with the
new memory channel information.
4.
Press and hold F-1 (
MW
) for 1-2 seconds to store the memory location.
5.
To continue creating memory channels, return to step 1 of Entering Frequency, Offset, and Tone. If the
offset remains the same, return to step 2. If you have finished programming memory channels, Press the
F-3 key in the M2 menu.
MEMO
will appear on the display when in memory mode.