Icom IC-705, Reference Manual

Page: 7 / 29

6
REMOTE CONTROL
Cmd� Sub cmd� Data Description
1A* 05 SET > Function
0039 00 ~ 05 Send/read the TX Delay (50 MHz)
setting
( 00=OFF, 01=10 ms, 02=15 ms,
03=20 ms, 04=25 ms, 05=30 ms)
0041 00 ~ 05 Send/read the TX Delay (144 MHz)
setting
( 00=OFF, 01=10 ms, 02=15 ms,
03=20 ms, 04=25 ms, 05=30 ms)
0042 00 ~ 05 Send/read the TX Delay (430 MHz)
setting
( 00=OFF, 01=10 ms, 02=15 ms,
03=20 ms, 04=25 ms, 05=30 ms)
0043 00 ~ 05 Send/read the Time-Out Timer
setting
( 00=OFF, 01=3 min, 02=5 min,
03=10 min, 04=20 min, 05=30 min)
0044 00/01 Send/read the PTT Lock setting
( 00=OFF, 01=ON)
0045 00/01 SPLIT >
Send/read the Quick SPLIT setting
( 00=OFF, 01=ON)
0046 See p� 19� SPLIT >
Send/read the SPLIT Offset setting
0047 00/01 SPLIT >
Send/read the SPLIT LOCK setting
( 00=OFF, 01=ON)
0048 00/01 Send/read the Tuner (PTT Start) setting
( 00=OFF, 01=ON)
0049 00 ~ 02 Send/read the Auto Repeater setting
( 00=OFF, 01=ON (DUP),
02=ON (DUP,TONE))
0050 00 ~ 02 Send/read the RTTY Mark
Frequency setting
( 00=1275 Hz, 01=1615 Hz,
02=2125 Hz)
0051 00 ~ 02 Send/read the RTTY Shift Width
setting
( 00=170 Hz, 01=200 Hz, 02=425 Hz)
0052 00/01 Send/read the RTTY Keying Polarity
setting
( 00=Normal, 01=Reverse)
0053 00/01 SPEECH >
Send/read the SPEECH Language
setting
( 00=Japanese, 01=English)
0054 00/01 SPEECH >
Send/read the Alphabet setting
( 00=Normal, 01=Phonetic Code)
0055 00/01 SPEECH >
Send/read the SPEECH Speed setting
( 00=Slow, 01=Fast)
0056 00 ~ 02 SPEECH >
Send/read the RX Call Sign
SPEECH setting
( 00=OFF, 01=ON (Kerchunk),
02=ON (All))
Cmd� Sub cmd� Data Description
1A* 05 SET > Function
0057 00/01 SPEECH >
Send/read the RX>CS SPEECH setting
( 00=OFF, 01=ON)
0058 00/01 SPEECH >
Send/read the MIC Up/Down
SPEECH setting
( 00=OFF, 01=ON)
0059 00/01 SPEECH >
Send/read the S-Level SPEECH setting
( 00=OFF, 01=ON)
0060 00/01 SPEECH >
Send/read the MODE SPEECH setting
( 00=OFF, 01=ON)
0061 0000 ~ 0255 SPEECH >
Send/read the SPEECH Level setting
( 0000=0% ~ 0255=100%)
0062 00/01 Send/read the [SPEECH/LOCK]
Switch setting
( 00=SPEECH/LOCK,
01=LOCK/SPEECH)
0063 00/01 Send/read the Lock Function setting
( 00=MAIN DIAL, 01=PANEL)
0064 00/01 Send/read the Memo Pad Quantity
setting
( 00=5 ch, 01=10 ch)
0065 00 ~ 02 Send/read the MAIN DIAL Auto TS
setting
(00=OFF, 01=Low, 02=High)
0066 00/01 Send/read the MIC Up/Down Speed
setting
(00=Slow, 01=Fast)
0067 00 ~ 02 Send/read the [NOTCH] Switch
(SSB) setting
(00=Auto, 01=Manual, 02=Auto/Manual)
0068 00 ~ 02 Send/read the [NOTCH] Switch
(AM) setting
(00=Auto, 01=Manual, 02=Auto/Manual)
0069 00/01 Send/read the SSB/CW
Synchronous Tuning setting
(00=OFF, 01=ON)
0070 00/01 Send/read the CW Normal Side setting
(00=LSB, 01=USB)
0071 00/01 Send/read the Charging (Power ON)
setting
(00=OFF, 01=ON)
0072 00/01 Send/read the USB Power Input
(Phone, Tablet, PC) setting
(00=OFF, 01=ON)
0073 00/01 Send/read the Power OFF Setting
(for Remote Control) setting
( 00=Shutdown only,
01=Standby/Shutdown)
SET > Function > Remote MIC Key
0074 See p� 20� Send/read the [A] setting
0075 See p� 20� Send/read the [B] setting
0076 See p� 20� Send/read the [

] setting
0077 See p� 20� Send/read the [

] setting
Remote control (CI-V) information
D
Command table