![background image](http://html2.mh-extra.com/html/icom/ic-410pro/ic-410pro_basic-manual_4016691003.webp)
ii
PRECAUTIONS
R
WARNING! NEVER
connect the transceiver to an AC
outlet. This may pose a fire hazard or result in an electric
shock.
R
WARNING! NEVER
operate or touch the transceiver
and microphone with wet hands. This may result in an
electric shock or damage the transceiver and microphone.
R
WARNING! NEVER
connect the transceiver to a
power source of more than 16 V DC. This could cause a fire
or damage the transceiver.
R
WARNING! NEVER
connect the transceiver to a
power source using reverse polarity. This will damage the
transceiver.
EXPLICIT DEFINITIONS
WORD
DEFINITION
R
DANGER!
Personal death, serious injury or an
explosion may occur.
R
WARNING!
Personal injury, fire hazard or electric
shock may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No
risk of personal injury, fire or electric
shock.
R
WARNING! NEVER
cut the DC power cable between
the DC plug and fuse holder. If an incorrect connection is
made after cutting, the transceiver may be damaged.
R
WARNING! NEVER
place the transceiver where
normal operation of the vehicle may be hindered or where it
could cause bodily injury.
CAUTION: NEVER
expose the transceiver and
microphone to rain, snow or any liquids. The transceiver and
microphone may be damaged.
DO NOT
push the PTT when not actually intending to
transmit.
DO NOT
allow children to play with any transceiver
equipment containing a transmitter.
DO NOT
operate the transceiver near unshielded electrical
blasting caps or in an explosive atmosphere.
DO NOT
operate the transceiver for extended periods
without running the vehicle’s engine. The transceiver’s
power consumption may soon exhaust the vehicles battery.
DO NOT
set the transceiver in a place without adequate
ventilation. Heat dissipation may be affected, and the
transceiver may be damaged.
DO NOT
use harsh solvents such as benzine or alcohol to
clean the transceiver, as they will damage the transceiver’s
surfaces. If the transceiver becomes dusty or dirty, wipe it
clean with a soft, dry cloth.