![background image](http://html.mh-extra.com/html/icom/ic-40s/ic-40s_instruction-manual_612139007.webp)
3
2
PANEL DESCRIPTION
y
SCAN TYPE SELECTION SWITCH [O/G]
➥
Push to select the scan types in order. (p. 8)
• Open scan—“OS” appears.
• Group scan—“GS” appears.
• Priority scan—“PS” appears.
➥
When the group or priority scan is selected, this switch
sets the displayed channel as the priority channel for the
selected scan when pushed for 2 sec. (p. 9)
• While the priority channel is set, the priority channel is dis-
played at the right of the operating channel.
u
OUTPUT POWER SWITCH [LOW]
➥
Push this switch to toggle between high and low output
power. (p. 5)
➥
Enters set mode when pushed for 2 sec.
➥
Scrolls the set mode contents while in the set mode.
i
DUPLEX SWITCH [DUP]
➥
Toggles the selected channel between duplex or simplex
operation on channels 1 to 8. (p. 7)
➥
Toggles the lock function ON and OFF when pushed for
2 sec. (p. 6)
• “
” appears when the lock function is activated.
o
FUNCTION DISPLAY (p. 4)
!0
TRANSMIT INDICATOR (p. 5)
Lights red while transmitting.
!1
EXTERNAL DC POWER JACK [CHARGE]
Connect a 12 to 16 V DC power source using the optional
cables, CP-12L or OPC-254L, to charge the attached bat-
tery pack; or connect the BC-110V wall charger for charg-
ing.
CAUTION:
This connection is for charging ONLY.
Power to the transceiver must be turned OFF during
charging.
!2
SPEAKER/MICROPHONE
!3
EXTERNAL SPEAKER AND MICROPHONE JACKS
[SP/MIC]
Connect an optional speaker-microphone or headset, if de-
sired. The internal microphone and speaker will not func-
tion when either is connected. (See p. 19 for a list of
available options.)
!4
ANTENNA CONNECTOR (p. 1)
Connects the supplied antenna.