![background image](http://html.mh-extra.com/html/icom/ic-40s/ic-40s_instruction-manual_612139019.webp)
OTHER FUNCTIONS
15
7
■
Time-out timer
To prevent continuous, extend transmissions, the transceiver
has a time-out timer. This timer turns a transmission OFF 1,
2, 3 or 4 min. after it starts. This timer can be cancelled.
Approx. 5 sec. before the time-out time elapses, the trans-
ceiver emits a beep tone.
q
Push [LOW] for 2 sec. to enter set mode.
w
Push [LOW] several times until “tt” appears.
e
Push [
Y
] or [
Z
] to select the time-out time or to turn the
function OFF.
- 1, 2, 3 and 4 minutes and OFF are available.
r
Push [LOW] for 2 sec. to exit set mode.
■
Power saver
The power saver function reduces the current drain to con-
serve battery power.
q
Push [LOW] for 2 sec. to enter set mode.
w
Push [LOW] several times until “PS” appears.
e
Push [
Y
] or [
Z
] to turn the power saver ON or OFF, re-
spectively.
r
Push [LOW] for 2 sec. to exit set mode.
■
Confirmation beeps
You can select silent operation by turning beep tones OFF or
you can have confirmation beeps sound at the push of a
switch by turning beep tones ON. The beep tone volume is
linked with [VOL].
q
Push [LOW] for 2 sec. to enter set mode.
w
Push [LOW] several times until “bE” appears.
e
Push [
Y
] or [
Z
] to turn the confirmation beep ON or OFF,
respectively.
r
Push [LOW] for 2 sec. to exit set mode.
[
[
[
4 min. time-out timer is selected.
Time-out timer is cancelled.