Icom IC-4008E, Instruction Manual

Page: 22 / 32

OTHER FUNCTIONS
8
17
‘ ‘
ATS (Automatic Transponder System)
This allows you to confirm whether or not a call has reached the re-
ceiving party even if the operator is temporarily away from the
transceiver. No “Ring” tone is emitted with this function.
➥
Push [MODE], while [PTT] is
ON to turn the function
ON/OFF.
• “ ” appears on the display.
• The transceiver starts to send a
searching signal every 60 sec.
- When the transceiver receives an
answer back signal, “ ” stays on
the display until the next search
transmit.
- If no reply is received, “ ” blinks until the next search transmit.
NOTE: Above setting is for the calling station only. A called party
automatically sends an answer back signal without any preset-
tings.
All IC-4008E’s operating on the same operating channel will an-
swer back to your call in your communication area.
‘ ‘
Low battery indicator
➥
Appears when the battery is nearing
exhaustion.
• A warning beep is emitted while turn-
ing the power ON.
➥
Appears and blinks when battery re-
placement is necessary.
UP
DO
WN
MODE
POWE
R
appears.
IC-4008E-2 02.3.23 3:26 PM Page 22 (1,1)