Icom IC-2725E, Instruction Manual

Page: 50 / 96

5
MEMORY OPERATION
33
New2001
■
Memory clearing
Contents of programmed memories can be cleared (blanked),
if desired.
q
Push [V/MHz•SCAN] to select VFO mode in the desired
band (left or right).
w
Push the same band’s [M/CALL•MW] for 1 sec.
• “
!
” indicator and the memory channel number blink.
e
Rotate the same band’s [DIAL] to select the memory chan-
nel to be cleared.
• Memory channels not yet programmed are blank.
r
Push the same band’s [M/CALL•MW] momentarily, then
push the [M/CALL•MW] again for 1 sec.
☞
This operation must be performed within 1.5 sec.
• 3 beeps sound, then the frequency is cleared.
• “
!
” indicator and the channel number blink continuously.
• When clearing the call channel, the current VFO conditions are
re-programmed into the call channel automatically.
t
Push the same band’s [MAIN•BAND] or [V/MHz•SCAN], to
return to VFO mode.
☞
NOTE: Be careful!— the contents of cleared memories
CANNOT be recalled.
[EXAMPLE]: Clearing memory channel 20.
MAIN
T X
M
MAIN
T X
M
MAIN
T X
M
MAIN
T X
M
MAIN
T X
M
Push to select VFO. Rotate for selecting memory channel. Push for 1 sec.
Push any switch, except . Push momentarily, then push again for 1 sec.
Beep
Beep
Beep
“
“
“
“
“
MW
M/CALL
MW
M/CALL
MW
M/CALL
MW
M/CALL
SCAN
V/MHz
IC-2725E_1.qxd 02.12.18 12:58 Page 33 (1,1)