![background image](http://html2.mh-extra.com/html/icom/ic-2300h/ic-2300h_service-manual-addendum_3754786024.webp)
5 - 2
ADJUSTMENT
TRANSCEIVER’S
CONDITION
OPERATION
ADJUSTMENT
ITEM
VALUE
REFERENCE
FREQUENCY
1
• Transmitting
1) Connect a power meter or dummy load
to the antenna connector.
2) Loosely couple a frequency counter to
the antenna connector.
3) While transmitting, adjust the frequency
using
[DIAL]
, and then push
[S.MW]
to
store the adjustment value.
[
]
145.000000 MHz
(146.000000 MHz*)
(±100 Hz)
*: For [USA]
5-2 FREQUENCY ADJUSTMENT
1) Select an adjustment item using
[BANK]
or
[V/MHz]
.
2) Set or modify the adjustment value as specifi ed using
[DIAL]
, and then push
[S.MW]
.
5-1 PREPARATION (continued)
█
ENTERING THE ADJUSTMENT MODE
█
QUITTING THE ADJUSTMENT MODE
█
KEY ASSIGNMENTS FOR THE ADJUSTMENT MODE
1) Turn OFF the power.
2) Connect the JIG cable (See page 6-1) to the microphone connector.
3) While holding down
[SET]
and
[MONI]
, turn ON the power.
1) Turn OFF the power.
2) Disconnect the JIG cable, and then turn ON the power.
S.MW
SQL
VOL
MW
BANK
OPT
[SET]
Connect the JIG cable (See page 6-1) here.
Push to turn ON the power.
[MONI]
S.MW
SQL
VOL
MW
BANK
OPT
LOCK
SET
ANM
MONI
DUP
LOW
T-SCAN
TONE
PRIO
M/CALL
SCAN
V/ MHz
DIGITAL PRIO
AO BUSY
MUTE
NAR
MID
LOW
Adjustment item
Adjusts the value for the item
Stores the value for the item
Selects the previous adjustment item
Selects the next adjustment item
(without storing value)
Adjustment frequency
TX power