![background image](http://html1.mh-extra.com/html/icom/i703/i703_service-manual_611944004.webp)
1 - 1
SECTION 1
SPECIFICATIONS
■
GENERAL
• Frequency coverage
:
Receive
0.030 – 60.000 MHz*
Transmit
1.800 –
1.999 MHz*
3.500 –
3.999 MHz*
7.000 –
7.300 MHz*
10.100 – 10.150 MHz
14.000 – 14.350 MHz
18.068 – 18.168 MHz
21.000 – 21.450 MHz
24.890 – 24.990 MHz
28.000 – 29.700 MHz
50.000 – 54.000 MHz*
*Depending on version.
• Mode
: USB, LSB, CW, RTTY (FSK), AM, FM
• Number of memory ch.
: 105 (99 regular, 6 scan edges)
• Antenna connector
: SO-239/50
Ω
(at antenna tuner off)
• Power supply requirement : 13.8 V DC ±15% (negative ground)
• Frequency stability
: • Temp. fluctuations 0˚C to +50˚C
(+32˚F to +122˚F)
Less than ± 0.5 ppm.
• Temp. fluctuations –10˚C to +60˚C
(+14˚F to +140˚F)
Less than ± 2.5 ppm.
• Frequency resolution
: General
10 kHz shift
Automatic
50 kHz shifit
Fine
Less than 2 Hz shift
• Current consumption
:
Transmit
10 W
: 3.0 A (at 13.8 V DC)
5 W
: 2.0 A (at 9.6 V DC)
Receive
Standby
: 300 mA (at 9.6 V DC)
AF output : 450 mA (at 9.6 V DC)*
1
AF output : 1.2 A (at 13.8 V DC)*
1
*
1
with 10 % distortion
• Usable temperature range : –10˚C to +60˚C (+14˚F to +140˚F)
• Dimensions
: 167(W)
✕
58(H)
✕
200(D) mm
(projections not included)
6
9
⁄
16
(W)
✕
2
9
⁄
32
(H)
✕
7
7
⁄
8
(D) inch
• Weight
: 2.0 kg (4 lb 7 oz)
• CI-V connector
: 2-conductor 3.5 (d) mm (
1
/
8
")/8
Ω
• ACC connector
: 13-pin
■
TRANSMITTER
• Output power
:
1.8–50 MHz band
SSB/CW/RTTY/FM 0.1–10 W*
1
0.1–5 W*
2
AM
0.1–4 W*
1
0.1–2 W*
2
*
1
at 13.8 V DC power supply, *
2
at 9.6 V DC power supply
• Modulation system
:
SSB
Balanced modulation
AM
Low level modulation
FM
Variable reactance modulation
• Spurious emissions
:
Below 30 MHz
Less than –50 dB
Above 30 MHz
Less than –60 dB
• Carrier suppression
: More than 40 dB
• Unwanted sideband supp. : More than 50 dB
• Microphone connector
: 8-pin modular jack (600
Ω
)
• KEY connector
: 3-conductor 6.35 (d) mm (
1
/
4
")
• RTTY connector
: 3-conductor 3.5 (d) mm (
1
/
8
")
■
RECEIVER
• Receive system
: Double superheterodyne
• Intermediate frequencies
: 1st IF; 64.455 kHz, 2nd IF; 455 kHz
• Receive sensitivity
:
(Pre-amp. is ON.)
Note: SSB, CW and AM modes are measured at 10 dB S/N.
FM mode are measured at 12 dB SINAD.
*
1
Except 4–4.5 MHz, 8–9 MHz. *
2
Pre-amp. is OFF.
• Squelch Sensitivity
: (Pre-amp. is ON.)
AM, SSB, CW, RTTY Less than 5.6 µV
FM
Less than 0.32 µV
• Selectivity* (Typical)
:
SSB, CW, RTTY
More than 2.4 kHz/–6 dB
Less than 4.0 kHz/–60 dB
AM, FM-N
More than 9.0 kHz/–6 dB
Less than 20 kHz/–50 dB
FM
More than 15 kHz/–6 dB
Less than 30 kHz/–50 dB
*Without an optional filter unit and with mid bandwidth selected.
• Spurious and image rejection ratio:
HF band
More than 70 dB
50 MHz band
More than 65 dB (except IF through)
• Audio output power
: More than 1.0 W at 10% distortion
with an 8
Ω
load, 13.8 V DC
More than 5.0 W at 10% distortion
with an 8
Ω
load, 9.6 V DC
• RIT variable range
: ± 9.99 kHz
• PHONES connector
: 3-conductor 3.5 (d) mm (
1
/
8
")/8
Ω
• EXT SP connector
: 2-conductor 3.5 (d) mm (
1
/
8
")/8
Ω
FM
—
—
0.5 µV
0.25 µV
FREQUENCY
0.5 – 1.8 MHz
1.8 – 28 MHz*
1
28 – 29.999 MHz
50 MHz band
SSB/CW/RTTY
—
0.16 µV
0.16 µV
0.13 µV
AM
13 µV*
2
2 µV
2 µV
1 µV
All stated specifications are subject to change without notice or obligation.