Icom i2725E, Instruction Manual, Page: 74 / 96

57
11
OTHER FUNCTIONS
New2001
D D
DTCS polarity
Sets DTCS polarities for transmission and reception from
“nn,” “nr,” “rn” and “rr.”
(default: nn)
D D
Offset frequency
Sets the duplex offset frequency within 0 to 20 MHz range.
During duplex (repeater) operation, transmit frequency (or re-
ceive when reverse function is set to ON) shifts the set fre-
quency.
(default value may differ depending on operating frequency
band and versions)
D D
Tuning step
Selects tuning step from 5, 10, 12.5, 15, 20, 25, 30 and
50 kHz for [DIAL] or [
Y
]/[
Z
] operation.
(default value may differ
depending on operating frequency band and versions)
D D
Scan resume timer
Selects scan resume timer from SCT-15 (default), SCT-10,
SCT-5 and SCP-2.
• SCT-15/10/5 : Scan pauses for 15/10/5 sec., then re-
sumes.
• SCP-2 : Pause on a signal until signal disap-
pears, then resumes 2 sec. after the sig-
nal disappears.
D D
Channel skip setting
Sets channel skip setting from ON and OFF for memory skip
scan operation.
This item appears when set mode is accessed from memory
mode only.
MAIN
T X
M
MAIN
T X
M
SKIP
• “
~
” appears
when set to “On.”
• Default setting
MAIN
T X
M
MAIN
T X
M
MAIN
T X
M
MAIN
T X
DUP
MAIN
T X
DTCS
M
MAIN
T X
DTCS
M
• Transmit : normal
Receive : normal
(default)
• Transmit : normal
Receive : reverse
IC-2725E_1.qxd 02.12.18 12:58 Page 57 (1,1)