Icom i2725E, Instruction Manual, Page: 65 / 96

48
9
DTMF MEMORY ENCODER
New2001
9
D
Programming a DTMF code— via microphone
z
Push [FUNC] then [
LOW
6(DTMF)] to turn the
DTMF encoder ON.
• “d” appears in place of the main band’s 100 MHz digit.
x
Push [
SET
B(D-OFF)] to enter the DTMF memory
programming condition.
c
Push [
Y
] or [
Z
] to select the desired DTMF
memory channel.
v
Push the desired digit keys.
• When the first digit is input, previous memory contents
are cleared automatically.
• “E” stands for “
M M
” and “F” stands for “# .”
• Push [
Y
]/[
Z
] and repeat this step if you make a mistake.
• The S/RF indicator shows the digit group. The indication
increases every 6 digits.
b
Push [VFO/LOCK] to exit the programming condition.
• The [
CLR
A(MW)] key cannot be used to exit. If pushed, code “A”
is input. Reprogram in such a case.
DTMF
[EXAMPLE]: Programming “5428AB453” into DTMF memory channel “d4.”
MAIN
T X
M
MAIN
T X
M
MAIN
T X
M
MAIN
T X
M
MAIN
T X
M
MAIN
T X
M
MAIN
T X
M
Push
Push
Push
Push
Push then .
IC-2725E_1.qxd 02.12.18 12:58 Page 48 (1,1)