4-4
Multiple Table
•
Decode/Encode
Decode/Encode
Decode/Encode
Decode/Encode
Enter the desired C. Tone and/or RAN code for Decode
and Encode columns respectively.
▒ NOTE:
NOTE:
NOTE:
NOTE:
▒ When "Simplex/Semi-Duplex" is selected in the
▒ Operation Mode
Operation Mode
Operation Mode
Operation Mode in the Memory CH screen, only
▒ C. Tone and/or RAN code specified in Encode
▒ columns are used.
When "Analog" is selected in Type
When "Analog" is selected in Type
When "Analog" is selected in Type
When "Analog" is selected in Type
Select the desired CTCSS frequency from the list or
enter a 3-digit DTCS code with polarity, N (Normal) or I
(Inverse), for Decode
Decode
Decode
Decode and Encode
Encode
Encode
Encode respectively.
When "Digital“ is selected in Type
When "Digital“ is selected in Type
When "Digital“ is selected in Type
When "Digital“ is selected in Type
Set the desired RAN (Radio Access Number) from 00
to 63 (decimal number) to separate the repeater from
the same/adjacent channel station according to the
assigned code for Decode
Decode
Decode
Decode and Encode
Encode
Encode
Encode respectively.
The repeater selectively accesses the one of several
repeaters within overlapping coverage areas allowing
the user to listen to a specific repeater.
"00" (decimal number) is a special code, and matches
to any RAN.
Group A - Digital
RAN=11
C.Tone=023N
Group B - Analog
Group B - Analog
Repeater/Base station
Multiple table function
Multiple table function
Multiple table function
Multiple table function
The IC-FR5000/FR6000 allows relaying between
multiple groups with one repeater. (When group
separation is carried out with a continuous tone)
This feature can be used in both analog and digital
mode.
•
Operation
Operation
Operation
Operation
− The C. Tone and/or RAN code is set for each group.
− When Group A is using the repeater, the other groups
cannot use it.
− When the Group A relay is finished, the other groups
can then use the repeater.
31
▒ NOTE:
NOTE:
NOTE:
NOTE:
▒ When "Repeat" or "Full-Duplex" is selected, enter the
▒ different frequency in RX and TX columns.
▒ Otherwise, the setting cannot be activated correctly.
•
Multi Table No.
Multi Table No.
Multi Table No.
Multi Table No.
Select the desired Multi Table No. within 1 to 16 and
OFF.
Up to 16 C. Tones and/or RAN codes assigned in the
table can be decoded and encoded in the CH.
Multi Table setting in the Multiple Table screen must
be specified to use the function.
▒ NOTE:
NOTE:
NOTE:
NOTE:
▒ - When "Analog" is selected in CH Type
CH Type
CH Type
CH Type, only the
▒ assigned C. Tones in the selected Multi Table are
▒ available.
▒ - When "Digital" is selected in CH Type
CH Type
CH Type
CH Type, only the
▒ assigned RAN codes in the selected Multi Table are
▒ available.
Analog
Desired CTCSS frequency or DTCS code
can be set in
Decode
and
Encode
(FM
mode operation).
Digital
Desired RAN code can be set in
Decode
and
Encode
(Digital mode
operation).
to any RAN.
Multiple table setup
Multiple table setup
Multiple table setup
Multiple table setup
Enter up to 16 C. Tone and/or RAN code in each Multi
Table.
•
Table No.
Table No.
Table No.
Table No.
Select the desired Multi Table No. within 1 to 16.
When the number is selected in Multi Table No.
Multi Table No.
Multi Table No.
Multi Table No. in the
Memory CH screen, the specified C. Tones and/or RAN
codes are used as the encoder and decoder in the
channel.
▒ NOTE:
NOTE:
NOTE:
NOTE:
▒ - When "Analog" is selected in CH Type
CH Type
CH Type
CH Type in the
▒ Memory CH screen, only the assigned C. Tones are
▒ available.
▒ - When "Digital" is selected in CH Type
CH Type
CH Type
CH Type in the
▒ Memory CH screen, only the assigned RAN codes
▒ are available.
•
Type
Type
Type
Type
Select the signaling type from Analog and Digital.
Repeat :Repeat
For repeater operation.
Full-Duplex :Full-
Duplex
For base station operation
in full-duplex mode.
Simplex :Semi-
Duplex/Simplex
For base station operation
in simplex mode.
Memory Channel setup
Memory Channel setup
Memory Channel setup
Memory Channel setup
•
Operation Mode
Operation Mode
Operation Mode
Operation Mode
Select the usage of the channel from Repeat, Full-
Duplex and Simplex.
C.Tone=151.4Hz
Group B - Analog