You can store up to 6 “MY” call signs, [MY1]
–[MY6].
If necessary, enter a note of up to 4 characters, such as the
model of the transceiver, name, area indication, and so on, after
your call sign.
Example: Program “JA3YUA/ID31” into the call sign memory
channel [MY1].
• A to Z, 0 to 9, / and (Space) can be se
-
lected.
• If you make a mistake, push [CLR]
to delete the selected character, num-
ber or symbol.
• Push D-pad(
"
) to enter a space or rotate [DIAL] to insert a
space to a desired .
ID-31A/ID-31E
D-STAR Quick Guide
[
DR mode
]
The DR (D-STAR
®
Repeater) mode is one mode you can use for D-STAR
®
repeater operation. In this mode, you can select
the preprogrammed repeater or frequency in “FROM” (the access repeater or simplex), and UR call sign in “TO” (destina
-
tion), as shown on page 3. The DR mode uses the programmed Repeater List as it’s data source.
1
2
This quick guide assumes that your own call sign has already been registered at a gateway re-
peater, and uses the preset repeater list for the descriptions.
*If needed, ask the gateway repeater administrator for call sign registration instructions.
D-STAR Terms
D-STAR:
Digital Smart Tech
-
nologies for Ama-
teur Radio, an open
protocol.
Area:
C o m m u n i c a t i o n
range that covers a
D-STAR repeater.
Gateway repeater:
A D-STAR repeater,
connected to the In-
ternet.
Local CQ:
To call a station
through your local
area (access) re
-
peater.
Gateway CQ:
To call through your
local area (access)
repeater, repeater
gateway, and the
Internet to your des-
tination repeater.
JA3YU
A calling
through JP3YHH
Port A*...
Osaka
Hirano
Osaka
Hirano
T
oky
o
Hamacho
T
oky
o
Hamacho
D-STAR radio
■
D-STAR repeater operating example (Example: from Osaka Hirano to
T
okyo Hamacho)
Your access
repeater
Destination
repeater
Internet
JA3YUA calling
through JP3YHH
Port A*...
ID-31A/E
Selecting
“
FROM
”
To reply a received call from your access repeater
Select your access repeater
Push D-pad(
w
) to select “FROM,” and then push D-pad(Ent).
Push D-pad(
e
) to select “Repeater List,” and then push D-
pad(Ent).
• The REPEATER GROUP screen is displayed.
Push D-pad(
r
) to select the repeater group where your destination
repeater is listed, and then push D-pad(Ent). (Example: 11: Japan)
Push D-pad(
t
) to select “Hamacho430,” and then push D-
pad(Ent).
• “Hamacho430” is displayed on “FROM.”
Hold down
q
for 1 second.
• The DR mode is selected.
2. Program your own call sign (programming mode)
1. Select “My Call Sign” channel, then enter to programming mode
Register and set your own Call sign
Push D-pad(
w
) to select the root item (“My
Station”), and then push D-pad(Ent).
Push
t
, and then push D-pad(
) to se
-
lect “Edit.”
Push D-pad(Ent) to enter the call sign programming mode.
y
• A cursor appears and blinks.
Push [MENU]
q
to enter the menu mode.
Push D-pad(
e
) to select “My Call Sign,”
and then push D-pad(Ent).
Push D-pad(
r
) to select the call sign mem
-
ory channel “1” ([MY1]).
Rotate [DIAL] to select the first digit. (Example: J)
u
!2
Push D-pad(Ent) to set the programmed
call sign and note.
!3
Push D-pad(Ent) again to return to the MY
CALL SIGN screen.
• Two beeps sound.
!4
Push [MENU]
to exit to the MENU screen.
!1
Repeat steps
u
and
i
to program the de-
sired 4 character note.
(Example: ID31)
!0
Push D-pad(
"
) several times to move the cursor to the right of
“/”.
o
Repeat steps
u
and
i
to enter your own
call sign of up to 8 characters, including
spaces.
(Example: First, J, then A, then 3, then Y,
then U, then A)
Push D-pad(
i
"
) to move the cursor to the second digit.
Antenna connector
Control dial
Volume control
Function display
Internal microphone
External Speaker/micro
-
phone Jack
VFO/MHz • Clear • Output
-
power key
Enter key
RX
Ú
CS (Rx call sign set)/
Up key
D-pad
CS (Call sign)/
Right key
CD (Rx call
record)/
Left key
DR/
Down key
Memory/Call
•
Select memory write key
Data Jack
External DC IN Jack
Quick menu key
TX/RX Indicator
PTT Switch
Squelch key
Menu • Lock key
FM/DV • Scan key
Power key
microSD card slot
Speaker
Front, top and side panels
■
Reply to a received call (One-touch Reply)
Release [PTT] to receive.
• After selecting, release
, and then
the selected station call sign is announced.
(RX>CS Speech function*)
• When a call sign has not been received correct
-
ly, error beeps sound, and no call sign is set.
• After selecting a call sign, the arrow icon
blinks on “TO.”
While holding down
, rotate [DIAL] to se
-
lect a call sign to send a reply.
If you want to reply to the last calling station,
hold down
for 1 second. (It is not neces
-
sary to rotate [DIAL].)
Push [CLR]
, [FM/DV]
, [M/CALL]
,
or
to return to the previous screen.
• The arrow icon on “TO” disappears.
The calling station’s call sign can be captured to quickly and
easily reply.
Means you received a
call from “JM1ZLK.”
Blinks after selecting
a call sign.
Means you have re-
plied to “JM1ZLK.”
D-pad
(
�
)
(Ent)
To program a note (up to 4 characters, for operating radio type,
area, and so on.), go to step
!0
, otherwise go to step
!2
.
MY1
MY2
DR mode screen
<Example> Select “Hamacho430” to “FROM”
* By selecting a repeater name, repeater call sign, frequency, duplex
and offset settings are automatically set.
* The repeater list that is used in the description, may differ with your
transceiver's preset contents.
* Set the repeater node to ‘B’ for the 430 MHz band, outside Japan.
See page 3-1 in Advanced Instructions, for details.
1. Set the received station’s call sign
2. Push [PTT] to transmit
3. Releasing the one touch reply mode
