![background image](http://html.mh-extra.com/html/icom/d-star-id-31a-d-star-id-31e/d-star-id-31a-d-star-id-31e_instruction-manual_611854036.webp)
27
5
BASIC OPERATION
New2001
New2001
■
Scan function
Scanning is a versatile function that can automatically search
for signals, and makes it easier to locate stations to contact
or listen to, or to skip unwanted frequencies.
[Example]: Full scan operation in the VFO mode
Push [V/MHz]
q
to select the VFO mode.
Set the squelch level.
w
Hold down [SCAN]
e
for 1 sec-
ond to enter the scanning type se-
lection mode.
r
Push D-pad(
E
) to select the desired
scanning type.
D-pad
(
�
)
(Ent)
• Select “ALL” for full scan, “P-LINKx” for
programmed link scan (x= 0 to 9), “Pxx”
for programmed scan (xx= 0 to 24; only
programmed scan edge numbers are
displayed), “DUP” for duplex scan or
“TONE” for tone scan.
t
Push D-pad(Ent) to start the scan.
• Scan pauses when a signal is received.
• Rotate [DIAL] to change the scanning
direction. This also causes the trans-
ceiver to resume scanning.
• Push [CLR]
to cancel the scan.
About the scanning steps:
The selected tuning step in
the VFO mode is used during scan.
•
The scan link name or scan name can be displayed when
scan link name or scan name is programmed.
• Scan name is not displayed during scan.
Blink
Summary of Contents for D-STAR ID-31A; D-STAR ID-31E
Page 76: ...67 MEMO ...
Page 77: ...68 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 MEMO ...
Page 78: ...69 MEMO ...