Icom CTGED03, Getting Started

Page: 6 / 11

11 10
ICOM at a Glance
This device is purpose-built to enable safe connec-
tion and operation with various Internet of Things
(IoT) equipment. Though it looks like a mobile phone,
it does not support all common mobile services
such as voice calls, but only securely facilitates the
missions for which it was built.
Model version: CTGED03
Software version: Android 9.0
INPUT: DC 5.0V/1.0A
13
11
8
1
3 2
6 7
4
9
10
1.Earphones Jack
2. Proximity sensor
3. Front Camera
4. Receiver
5. Mic 6. USB Port
7. Speaker
8. Control
Key
9. Volume- Control Key
10. Power On/Off
11. Rear Camera
12. Flash Light
13. Fingerprint Key
Sensor
Power ON/OFF
To power on your device, press and hold the power
button until the screen turns on. To power off your
device, press and hold the power button and then tap
Power Off. To force your device to restart, press the
power button and then tap Reboot.
Installing a SIM/SD Card
1.
Turn off the mobile device and
unplug the external power
supply.
2. Remove the back cover using
the groove on the side of the
phone.
3. Remove the battery.
4. Insert the SIM card with
Gold-colored contacts facing
down.
5. Insert the optional SD card (not
included) with the Gold-colored
connection facing down.
6. Insert the battery while making
sure that the connectors align.
7. Replace the back cover.
Follow the instructions in the
following figures to set up your
device.
SIM1 SIM2 SD
SIM1 SIM2 SD SIM1 SIM2 SD
ENGLISH