20
6
SCAN OPERATION
■
Memory (bank) scan
q
Select memory mode with [V/M].
w
For memory bank scan, rotate [DIAL] while pushing
[FUNC] to select the desired memory bank.
e
Make sure the squelch is set to the threshold point.
• Select automatic squelch (AUTO) or a level (1–9) where the
noise is just muted. (p. 11)
r
Push and hold [
↔
], then rotate [DIAL] to turn the memory
bank scan ON or OFF.
• “ALL” indicates all memory banks are scanned (memory bank
scan OFF); “BANK” indicates the selected memory bank is
scanned (memory bank scan ON).
t
Release [
↔
] to start the scan.
• Decimal point(s) flashes while scanning.
• To change the scanning direction, rotate [DIAL].
• If the pocket beep function is activated, the receiver automatically
selects the tone squelch function when a scan starts.
y
To stop the scan, push [
↔
] again.
S1 3
5
7 9
VOL
FM
PSKIP
146.100.000
TS
15.0
BANK
M:A00
S1 3
5
7 9
VOL
FM
PSKIP
146.100.000
TS
15.0
ALL
M:A00
Bank scan OFF
Bank scan ON
