background image

FMX 320/FMX 640  SERIES IR CAMERA USER MANUAL

17

Software arrives installed on computers and tablets purchased from ICI as complete 

systems and it will launch automatically on startup.  A copy of the software is provided on 

the Software USB Drive. 

Documentation can be found online on the IR Flash STM web page 

under the Downloads section or at this address:

https://infraredcameras.com/ir-flash-stm-manual/

• 

Processor: 

i5 or above (Quad Core or better)

• 

RAM: 

4 GB or above

• 

OS:

 Windows 8/8.1/10

• 

Hard Drive: 

256 GB or above

• 

Resolution:

 1920 x 1080

8-1 IR Flash Skin Temperature Monitor Software (IR Flash STM)

8-2 Cybersecurity

The computer supplied with a complete system is provided with the Windows Operating 

System. IR Flash STM software preinstalled and the system has been checked for viruses 

and malware prior to shipping. To further decrease the possibility of introducing malware, 

Infrared Cameras Inc. recommends you take steps to reduce the likelihood that the system 

be compromised, which include:

• 

Prior to connecting the system’s computer to the Internet or your secure internal 

network  be  sure  to  have  your  IT  department  install  your  organization’s  anti‐virus 

software, anti‐malware and, if applicable, system access software and apply security 

updates as necessary.

• 

If connecting the system’s computer to the Internet be sure to locate the computer 

behind a firewall.

• 

Install security updates to the computer’s operating system in accordance with your 

organization’s policies

• 

Do not use the system’s computer for other uses.

• 

Install software updates via instructions provided by Infrared Cameras Inc. only. Do not 

install software from unknown entities.

• 

Don’t connect unknown hardware devices, e.g. USB devices, external hard drives, etc. 

to the system computer.

• 

If you suspect that the system computer has been infected with malware, contact your 

organization’s IT department or Infrared Cameras Inc. for further assistance.

If your device does not require usage of the e-mail alert function using the device off a 

network is preferred.

Windows 10™ Operating System updates are evaluated by Infrared Cameras Inc. as they 

are released by Microsoft. Please contact Infrared Cameras Inc. Technical Support for 

compatibility information.

Summary of Contents for FMX 320 Series

























Reviews: